Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure. Service and Repair

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.

3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
4. Remove the fuel tank.
5. Remove the fuel tank pressure sensor (1) from the modular fuel sender (2).

INSTALLATION PROCEDURE

1. Install the fuel tank pressure sensor (1) to the modular fuel sender (2).
2. Install the fuel tank.
3. Lower the vehicle.
4. Connect the negative battery cable.
5. Inspect for fuel leaks.
5.1. Turn ON the ignition switch for 2 seconds.
5.2. Turn OFF the ignition switch for 10 seconds.
5.3. Turn ON the ignition switch.
5.4. Inspect for fuel leaks.