Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> C 1500 Truck 2WD V6-4.3L VIN W >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the Throttle Position (TP) sensor harness connector.




2. Remove the TP sensor attaching screws.

NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent, as damage may result.




3. Remove the TP sensor from the throttle body assembly.

INSTALLATION PROCEDURE

IMPORTANT: Ensure the throttle valve is closed.




1. Install the TP sensor on the throttle shaft.
2. Align the TP sensor flange holes with the throttle body attaching screw holes.

NOTE:Refer to Fastener Notice in Cautions and Notices.




3. Install the TP sensor attaching screws.

Tighten
Tighten the TP sensor attaching screws to 2.0 N.m (18 lb in).




4. Connect the TP sensor harness connector.
pro multis · About Operation CHARM