Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> C Tahoe 2WD V8-5.3L VIN T >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Intake Manifold >> Service and Repair >> Engine Sight Shield Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Sight Shield Replacement

Removal Procedure





1. Remove the sight shield bolts.
2. Remove the sight shield from the engine.
3. Remove the sight shield mounting bracket and bolts (if required).

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the sight shield mounting bracket and bolts.
Tighten the bracket bolts to 5 Nm (44 inch lbs.).

Notice: Use care when installing the engine sight shield to avoid contacting the manifold absolute pressure (MAP) sensor wire harness connector. Loss of engine performance or engine damage may result.

2. Install the engine sight shield and bolts to the bracket.
Tighten the bolts to 10 Nm (89 inch lbs.).
pro multis · About Operation CHARM