Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Camaro V6-3.8L VIN K >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Resistor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair

BLOWER MOTOR RESISTOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the key from the ignition in order to assure that the ignition switch will remain in the OFF position.
2. Remove the right instrument panel insulator.
3. Pull the carpet away from the heater module.
4. Remove the blower motor resistor bolt (2).
5. Disconnect the blower motor resistor electrical connector.
6. Remove the blower motor resistor (1).

INSTALLATION PROCEDURE




1. Install the blower motor resistor (1).
2. Connect the blower motor resistor electrical connector.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the blower motor resistor bolt (2).

Tighten
Tighten the blower motor resistor bolt to 2 (18 lb in).

4. Reposition the carpet.
5. Install the right instrument panel insulator.
6. Test the blower motor operation at each of the four speeds.
pro multis · About Operation CHARM