Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Camaro V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shifter M/T >> Service and Repair >> Shift Control Assembly Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shift Control Assembly Replacement

Removal Procedure





1. Remove the control lever boot.
2. Remove the transmission control bolts.





3. Clean the old sealant from the extension housing and the transmission control sealing surface.


Installation Procedure





1. Apply a continuous 3 mm (0.125 inch) bead of RTV sealant on the extension housing-to-control sealing surface. Use GM P/N 12345739 or equivalent.





Notice: Refer to Fastener Notice in Service Precautions.

2. Install the transmission control bolts.
^ Tighten the transmission control lever bolts to 17 Nm (13 ft. lbs.).
3. Install the control lever boot.
pro multis · About Operation CHARM