Procedures

Folding Top Fluid Addition

Important: Place the vehicle on a level surface.

1. Lower the folding top.
2. Remove the left side trim panel from the rear compartment.
3. Place a shop towel around the pump/motor in order to control oil spillage.
4. Remove the reservoir filler plug.




5. Add Dexron(R) 111 Automatic Transmission Fluid U.S. P/N 12378470, Canadian P/N 10952622 until the level is between the upper and the lower reservoir indicator lines.
6. Install the reservoir filler plug.
7. Cycle the folding top up and down several times.
8. Inspect the fluid when the top is in the down position and add fluid if necessary.
9. Install the left side trim panel to the rear compartment.