Accumulator Tube Replacement

REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the accumulator tube fitting nut from the accumulator.
Use a back-up wrench on the accumulator fitting.
3. Remove the accumulator tube fitting nut from the evaporator core.
Use a back-up wrench on the evaporator core fitting.
4. Remove the accumulator tube.
5. Remove and discard the O-Rings.

INSTALLATION PROCEDURE
1. Install new O-Rings on both ends of the accumulator tube.
2. Install the accumulator tube to the accumulator and the evaporator core.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the accumulator tube fitting nuts.
Use a back-up wrench on the accumulator and evaporator core fittings.

Tighten
Tighten the accumulator tube nuts to 35 N.m (26 lb ft).

4. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
5. Check the system for leaks. Refer to Leak Testing.