Tail Lamp: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the tail lamp wire harness socket (3).
2. Twist the lamp socket to remove.
3. Pull the bulb to remove from the socket.
4. Remove the tail lamp nuts (2).
5. Remove the tail lamp.

INSTALLATION PROCEDURE
1. Install the tail lamp.
2. Align the tail lamp to the deck lid applique.

NOTE: Refer to Fastener Notices in Service Precautions.

3. Install the tail lamp nuts (2).

Tighten
Tighten the tail lamps nuts to 6 N.m (53 lb in).

4. Install the lamp socket.
5. Connect the tail lamp wire harness socket (3).