Fastener Tightening Specifications

FASTENER TIGHTENING SPECIFICATIONS (UNIT REPAIR)

Bottom Pan to Case 12 Nm (106 lb. in.)
Channel Plate to Case 14 Nm (124 lb. in.)
Channel Plate to Case 12 Nm (106 lb. in.)
Channel Plate to Driven Sprocket Support 14 Nm (124 lb. in.)
Detent Spring Assembly to Channel Plate 12 Nm (106 lb. in.)
Drive Sprocket Support Assembly to Case 12 Nm (106 lb. in.)
Input Speed Sensor to Case 12 Nm (106 lb. in.)
Intermediate 4th Servo Cover to Case 12 Nm (106 lb. in.)
Line Pressure Plug to Case 12 Nm (106 lb. in.)
Lo/Reverse Servo Cover to Case 12 Nm (106 lb. in.)
Oil Level Control Plug to Case 12 Nm (106 lb. in.)
Oil Tube Assembly To Case 12 Nm (106 lb. in.)
Oil Tube Assembly to Forward Clutch 12 Nm (106 lb. in.)
Oil Tube Assembly to Lo/Reverse Servo Cover 12 Nm (106 lb. in.)
Output Shaft Speed Sensor to Case 12 Nm (106 lb. in.)
Pump to Case 12 Nm (106 lb. in.)
Pump to Channel Plate 12 Nm (106 lb. in.)
Pump to Channel Plate 12 Nm (106 lb. in.)
Side Cover to Case 28 Nm (22 lb. ft.)
Side Cover to Case (Stud) 28 Nm (22 lb. ft.)
Spacer to Driven Sprocket Support 14 Nm (124 lb. in.)
TFP Switch Assembly to Case 14 Nm (124 lb. in.)
TFP Switch to Channel Plate 14 Nm (124 lb. in.)
TFP Switch to Channel Plate 14 Nm 124 lb. in.)
Valve Body to Case 14 Nm 124 lb. in.)
Valve Body to Case 14 Nm 124 lb. in.)
Valve Body to Channel Plate 14 Nm (124 lb. in.)
Wiring Harness Clip to Case 12 Nm (106 lb. in.)