Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seals and Gaskets: Service and Repair

Removal Procedure
1. Remove the drive axle.
2. Remove the intermediate shaft.
3. Remove the drive axle oil seal.
4. Fill between the oil seal lips with chassis grease GM P/N 1051344 or equivalent.

Installation Procedure
1. Install the Drive Axle Seal.
2. Install the intermediate shaft.
3. Install the drive axle.
4. Install the ball joint. Refer to Lower Ball Joint Replacement in Steering and Suspension.
5. Install the stabilizer shaft.
6. Install the tire and wheel assembly.
7. Remove the safety stand.
8. Lower the vehicle.
9. Check and Fill the Transaxle Fluid. Refer to Transmission Fluid Checking Procedure.