Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Corvette V8-5.7L VIN G >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pressure Sensor: Service and Repair

REMOVAL PROCEDURE




1. Remove the Intake manifold.
2. Remove the Engine Oil Pressure (EOP) sensor electrical connector.

IMPORTANT: Clean the area around the EOP sensor before removal.




3. Remove the EOP sensor.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the new EOP sensor.

Tighten
Tighten the EOP sensor to 20 N.m (15 lb ft).




2. Install the EOP sensor electrical connector.
3. Install the intake manifold.
4. Perform the idle learn procedure. Refer to PCM Idle Learn Procedure.
pro multis · About Operation CHARM