Remote Compact Disc Player

Remote Compact Disc Player:

1. In order to operate the Compact Disc player, perform the following steps:
2. Insert a disk part way into the slot, label side up.
3. If the radio is in the OFF position and the ignition is in the ON position when you insert the CD, the radio turns on and begins playing the CD.
4. In order to load a CD with the ignition in the OFF position, press the EJECT button on the remote player and insert the disc.
5. In order to remove the disc, press the EJECT button and remove the disc.
6. All of the compact disc functions are controlled by the radio buttons except EJECT.
7. When a disc is in the player, a CD symbol appears next to the CD symbol in the bottom left corner on the display.
The track number will also be displayed.
8. If the disc comes back out and ERR appears on the display, inspect for the following conditions:
^ An upside down disc
^ A dirty, scratched, or wet disc
^ Too much moisture in the air
If there is too much moisture in the air, wait about one hour and try again.
^ The vehicle is operating on a very rough road.