Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Express 1/2 Ton Van V6-4.3L VIN W >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Light Switch: Service and Repair

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.





1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
2. Disconnect the electrical connector from the stoplamp switch.
3. Remove the retainer from the brake pedal pin.
4. Remove the stoplamp switch and the pushrod to the power brake booster from the brake pedal pin.
5. Unsnap the stoplamp switch from the power brake booster pushrod.

Installation Procedure





1. Snap the stoplamp switch onto the pushrod to the power brake booster.
2. Install the stoplamp switch with the pushrod on the brake pedal pin.
3. Connect the electrical connector to the stoplamp switch.
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
pro multis · About Operation CHARM