License Plate Lamp: Service and Repair

REMOVAL PROCEDURE
1. Remove the screws (4) that retain the license plate lamp to the license pocket.
2. Remove the license plate lamp (3) from the license pocket.
3. Disconnect the bulb socket (2) from the license plate lamp.
4. Remove the bulb (2) from the socket.

INSTALLATION PROCEDURE
1. Connect the bulb (2) into the socket.
2. Connect the bulb socket (2) into the license plate lamp.
3. Install the license plate lamp (3) to the license pocket.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the license plate lamp retaining screws (4) to the license pocket.

Tighten
Tighten the screws to 2.5 N.m (22 lb in).