Setting the Clock For Systems With Radio Data Systems

Press and hold the HR and MIN buttons for two seconds. Then press and hold the HR button until the correct hour appears. AM or PM will appear on the display. Press and hold the MN button until the correct minute appears. The clock may be set with the ignition OFF. The clock symbol will appear on the display in time-set mode.

In order to set the clock to the time of a station broadcasting Radio Data Systems (RDS) information, press and hold the HR and MN buttons at the same time for 2 seconds until UPDATED and the clock symbol appear on the display. If the time is not available from the station, NO UPDATE will appear on the display instead.