Air Distributor Duct Replacement (IP/LH/Center)
REMOVAL PROCEDURE1. Remove the instrument panel (IP) trim pad.
2. Remove the LH/Center IP air duct retaining bolts.
3. Remove the LH/Center IP air duct from the cross vehicle beam.
INSTALLATION PROCEDURE
1. Install the LH/Center air duct to the cross vehicle beam.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the air duct bolts.
Tighten
Tighten the air duct bolts to 10 N.m (89 lb in).
3. Install the instrument panel.