Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Maintenance >> Hoses >> Radiator Hose >> Service and Repair >> Radiator Hose Replacement - Inlet
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator Hose Replacement - Inlet

Removal Procedure

- Tools Required
- J 38185 Hose Clamp Pliers





1. Partially drain the coolant. Refer to Draining and Filling Cooling System.
2. Remove the left diagonal brace. Refer to Brace Replacement - Front Fender Upper Diagonal (Impala) or Brace Replacement - Front Fender Upper Diagonal (Monte Carlo) in Body and Frame.
3. Use the J 38185 in order to reposition the hose clamp at the radiator.
4. Disconnect the inlet hose from the radiator.





5. Use the J 38185 in order to reposition the hose clamp at the thermostat housing.
6. Disconnect the inlet hose from the thermostat housing. Remove the inlet hose.

Installation Procedure





1. Align the marks on the hose. Install the inlet hose.
2. Use the J 38185 in order to reposition and install the hose clamp at the thermostat housing.





3. Connect the inlet hose to the radiator.
4. Use the J 38185 in order to reposition and install the hose clamp at the radiator.
5. Install the left diagonal brace. Refer to Brace Replacement - Front Fender Upper Diagonal (Impala) or Brace Replacement - Front Fender Upper Diagonal (Monte Carlo) in Body and Frame.
6. Fill the cooling system. Refer to Draining and Filling Cooling System.
7. Inspect for leaks.
pro multis · About Operation CHARM