Rear Camber Adjustment

1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the strut from the vehicle.
4. Place the strut in a vise.
5. File the upper strut to knuckle attaching hole laterally. Compare before filing (2) to after filing (3).

Important: Check the toe after changing the camber. Refer to Rear Toe Adjustment





1. Install the strut to the vehicle. Do not tighten the bolts yet.
2. Install the strut to body bolts and install the brake hose bracket.
3. Install the tire and wheel assembly.
4. Lower the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

5. Adjust the camber (1).

Tighten
Tighten the strut to knuckle nuts to 120 Nm (88 ft. lbs.).