Wheel Alignment Specifications
| Front Caster | Alignment Specifications | 4.1 0 Degrees (deg) |
| Tolerance | 3.10-5.10 Degrees (deg) | |
| Front Camber | Alignment Specifications | -0.20 Degrees (deg) |
| Tolerance | -1.20 to +0.80 Degrees (deg) | |
| Individual Toe Measure the above Toe angles with the steering wheel at level position, visually aligned with the column. | Alignment Specifications | 0.05 Degrees (deg) |
| Tolerance | -0.07 to +0.17 Degrees (deg) | |
| Sum Toe | Alignment Specifications | 0.10 Degrees (deg) |
| Tolerance | -0.15 to +0.35 Degrees (deg) | |
| Cross Camber Slight Cross Camber specification differences can be made when servicing the vehicle for steering pull. | Alignment Specifications | 0.00 Degrees (deg) |
| Tolerance | -1.00 to +1.00 Degrees (deg) | |
| Cross Caster | Alignment Specifications | 0.00 Degrees (deg) |
| Tolerance | -1.00 to +1.00 Degrees (deg) | |
| Rear Camber | Alignment Specifications | -0.20 Degrees (deg) |
| Tolerance | -1.00 to +1.00 Degrees (deg) | |
| Rear Sum Toe | Alignment Specifications | 0.06 Degrees (deg) |
| Tolerance | -0.26 to +0.14 Degrees (deg) | |
| Rear Thust Angle | Alignment Specifications | 0.00 Degrees (deg) |
| Tolerance | -0.20 to +0.20 Degrees (deg) | |
| Trim Height All measurements are taken with a full fuel tank. The measurements for D, J, K and Z all have +/- 10 mm (3/8 in). | Z | 0 Inch (in) |
| D | 4 27/32 Inch (in) | |
| J | 9 21/64 Inch (in) | |
| K | 9 39/64 Inch (in) |