Wiper Arm Replacement

REMOVAL PROCEDURE

IMPORTANT:Observe the location of the wiper arm (2) before you remove the wiper arm. This will ensure correct installation.

1. Remove the nut cover and the retaining nut from the wiper arm.
2. Remove the wiper arm (2) from the wiper linkage (3).

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precations.

1. Install the wiper arm (2) to the wiper linkage (3). Secure the wiper arm with the retaining nut.

Tighten
Tighten the wiper arm retaining nut to 20 N.m (15 lb ft).

2. Install the wiper arm nut cover to the wiper arm.