Cruise Control Module: Service and Repair

REMOVAL PROCEDURE
1. Remove the instrument panel compartment.
2. Disconnect the cruise control module electrical connector.
3. Remove the following components from the vehicle:
^ The cruise control module mounting bolt
^ The cruise control module (2)

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Install the cruise control module (2) to the IP. Secure the module with the mounting bolt.

Tighten
Tighten the cruise control module mounting bolt to 10 N.m (89 lb in).

2. Connect the cruise control module electrical connector.
3. Install the instrument panel compartment.