General Specifications
| Brush Length-Standard | 10.5 Millimeter (mm) |
| Brush Length-Minimum | 1.5 Millimeter (mm) |
| Direction of Rotation | Clockwise(as viewed from pulley side) |
| Maximum Generator Output | 80 Ampere (A) |
| Maximum Generator Speed | 18,00 Revolutions Per Minute (rpm) |
| No-Load Generator Speed | 1100 Revolutions Per Minute (rpm) |
| Normal Operating Voltage | 12 Volts (V) |
| Polarity | Negative Ground |
| Regulator Voltage | 13.5-15.1 Volts (V) |
| Rotor Slip Ring Diameter-Standard | 14.2-14.4 Millimeter (mm) |
| Rotor Slip Ring Diameter-Minimum | 12.8 Millimeter (mm) |
| Standard Rotor Resistance | 2.7-3 at 20 Ohms At Degrees Celsius (ohms @ deg C) |
| Temperature Range | 30-90 Degrees Celsius (C) |