Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Tracker 2WD L4-1.6L VIN 6 >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Reservoir >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Reservoir: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the windshield washer pump electrical connector (3).
2. Disconnect the rear window washer pump electrical connector (2), if equipped.




3. Remove the 3 bolts (2) which secure the washer solvent container (1).




4. Drain the washer solvent from the washer solvent container (1) into a clean drain pan (2).




5. Remove the windshield washer nozzle hose (5) from the windshield washer pump (1) and the retainer on the side of the washer solvent container (3).
6. Remove the rear window washer nozzle hose (4) from the rear window washer pump (2) and the retainer on the side of the washer solvent container (3), if equipped.
7. Remove the windshield washer pump (1) from the washer solvent container (3).
8. Remove the rear window washer pump (2) from the washer solvent container (3), if equipped.

INSTALLATION PROCEDURE




1. Install the windshield washer pump (1) to the washer solvent container (3).
2. Install the rear window washer pump (2) to the washer solvent container (3), if equipped.
3. Install the windshield washer nozzle hose (5) to the windshield washer pump (1) and the retainer on the side of the washer solvent container (3).
4. Install the rear window washer nozzle hose (4) to the rear window washer pump (2) and the retainer on the side of the washer solvent container (3), if equipped.

NOTE: Refer to Fastener Notice in Cautions and Notices.




5. Install the washer solvent container (1) to the vehicle. Secure the container with 3 bolts (2).

Tighten
Tighten the washer solvent container bolts to 13 N.m (115 lb in).




6. Connect the windshield washer pump electrical connector (2), if equipped.
7. Connect the rear window washer pump electrical connector (2), if equipped.
8. Refill the washer solvent container with washer solvent, as necessary.
pro multis · About Operation CHARM