Brake Caliper Bracket Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Remove the brake pads. Refer to Brake Pads Replacement.
4. Remove two mounting bolts and the caliper bracket (2) from the vehicle.
5. Remove two caliper pins, with the boots, from the caliper bracket.


Installation Procedure





1. Install two caliper pins, with boots, to the caliper bracket.
2. Install the caliper bracket (2) to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

3. Secure the caliper bracket with two mounting bolts.
^ Tighten the caliper bracket mounting bolts to 85 Nm (61.5 lb ft).
4. Install the brake pads. Refer to Brake Pads Replacement.
5. Lower the vehicle.