Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Tracker 4WD L4-2.0L VIN C >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Control Arm Bushing >> Service and Repair >> Installation Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation Procedure

Important: When press-fitting bushings, apply compounding oil or soap water to the inside of the control arm housing in order to facilitate the procedure.





1. Use a hydraulic press (1) in order to install the front bushing (4) to the control arm (3). Press-fit the front bushing until the flange contacts the housing edge of the control arm (3).

Important: When press-fitting bushings, apply compounding oil or soap water to the inside of the control arm housing in order to facilitate the procedure.





2. Use a hydraulic press (1) in order to install the rear bushing (4) to the control arm (3). Press-fit the rear bushing until the flange contacts the housing edge of the control arm (3).
3. Install the front suspension lower control arm. Refer to Lower Control Arm Replacement.

pro multis · About Operation CHARM