Power Mirror Replacement (Without Turn Signal Indicator)

Power Mirror Replacement (Without Turn Signal Indicator)

Removal Procedure

1. Remove the front door trim panel. Refer to Door Trim Panel Replacement (Front Door) (Panel Replacement) .
2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement. Service and Repair
3. Remove the outside rearview mirror nuts.
4. Disconnect the electrical connectors.




5. Remove the outside rearview mirror from the front door.



Installation Procedure





1. Install the outside rearview mirror to the front door.
2. Connect the electrical connector.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the outside rearview mirror nuts.

Tighten the nuts to 10 N.m (89 lb in).

4. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement. Service and Repair
5. Install the front door trim panel. Refer to Door Trim Panel Replacement (Front Door) (Panel Replacement) .