Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Maintenance >> Hoses >> Radiator Hose >> Service and Repair >> Radiator Hose Replacement - Inlet
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator Hose Replacement - Inlet


Removal Procedure

^ Tools Required
- J 38185 Hose Clamp Pliers





1. Partially drain the coolant. Refer to Draining and Filling Cooling System.
2. Disconnect the inlet hose from the thermostat housing using the J 38185.
3. Disconnect the inlet hose from the radiator using the J 38185.
4. Remove the inlet hose.

Installation Procedure





1. Install the inlet hose in position and align the marks on the hose.
2. Connect the inlet hose to the radiator using the J 38185.
3. Connect the inlet hose to the thermostat housing using the J 38185.

Important: To properly fill the system you must use of the air bleed vents. Refer to Draining and Filling Cooling System.

4. Refill the coolant. Refer to Draining and Filling Cooling System.
pro multis · About Operation CHARM