Feature Customization - Changing the Interior Lighting Mode

Perform the following procedure to change the interior lighting mode:
1. Turn OFF the I/P dimmer switch.
2. Turn the ignition switch to the LOCK position.
3. Remove the BCM PRGRM fuse.
4. Turn the ignition switch to the ACC position.
- The BCM sounds the chime a number of times equivalent to the BCM type installed on the vehicle (1, 2, 3 or 4 chimes).
- Now the BCM has entered the feature customization mode.
5. To advance the interior lighting mode, cycle the I/P dimmer switch from OFF to DOME and back to OFF.

The BCM sounds the chime a number of times equivalent to the lighting mode currently set. A transition past mode 4 repeats the sequence starting with mode 1.

To exit and save the current customization mode:
1. Turn the ignition switch to the LOCK position.
2. Reinstall the BCM PRGRM fuse.