Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2001 >> C Tahoe 2WD V8-4.8L VIN V >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> HVAC System - Manual >> HVAC Control Assembly Replacement >> Heat Only
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heat Only

REMOVAL PROCEDURE




1. Remove the instrument panel (IP) bezel. Refer to Bezel Replacement - IP Cluster in Instrument Panel, Gauges and Console.
2. Remove the radio.
3. Remove the HVAC control assembly by firmly depressing and holding the retaining tabs. Slide the assembly forward.




4. Disconnect the temperature and the mode cables from the back of the HVAC control assembly.
5. Disconnect the electrical connection from the HVAC control assembly.
6. Remove the HVAC control assembly.

INSTALLATION PROCEDURE




1. Connect the electrical connection to the HVAC control assembly.
2. Connect the temperature and the mode cables to the back of the HVAC control assembly.




3. Install the HVAC control assembly to the IP carrier until you hear an audible snap.
4. Install the radio.
5. Install the IP bezel. Refer to Bezel Replacement - IP Cluster in Instrument Panel, Gauges and Console.
pro multis · About Operation CHARM