Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

HVAC System - Manual

HVAC CONTROL PROCESSOR REPLACEMENT - AUXILIARY


REMOVAL PROCEDURE
1. Remove the assist handles, if equipped.
2. Remove the windshield pillar moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
3. Remove the sunshades.
4. Remove the overhead console, if equipped.
5. Remove the center pillar garnish moldings.
6. Lower the front of the headliner down to access the auxiliary HVAC control processor.
7. Disconnect the electrical connector from the auxiliary HVAC control processor.
8. Remove the HVAC control processor from the headliner.

INSTALLATION PROCEDURE
1. Install the HVAC control processor to the headliner.
2. Connect the electrical connector to the auxiliary HVAC control processor.
3. Raise the front of the headliner back into place.
4. Install garnish moldings.
5. Install the overhead console, if equipped.
6. Install the sunshades.
7. Install the windshield pillar moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
8. Install the assist handles, if equipped.
9. Calibrate the HVAC module actuators. Refer to Re-Calibrating Actuator Recalibration - HVAC