Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2001 >> C Tahoe 2WD V8-4.8L VIN V >> Repair and Diagnosis >> Testing and Inspection >> Programming and Relearning >> Body Control Module (BCM) - Programming/RPO Configuration
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module (BCM) - Programming/RPO Configuration

1. The Body Control Module (BCM) must be programmed with the proper RPO configurations. The BCM stores the information regarding the vehicle options and if the BCM is not properly configured with the correct RPO codes the BCM will not control the features properly. Ensure that the following conditions exist in order to prepare for BCM programming:
^ The battery is fully charged.
^ The ignition switch is in the RUN position.
^ The data link connector (DLC) is accessible.
2. Follow the instructions on the Techline Terminal and scan tool to program the BCM.
3. If the BCM fails to accept the program, perform the following steps:
^ Inspect all BCM connections.
^ Verify that the Techline Terminal and scan tool have the latest software version.
pro multis · About Operation CHARM