Cabin Temperature Sensor / Switch: Service and Repair

[1][2]INSIDE AIR TEMPERATURE SENSOR REPLACEMENT (OVERHEAD)

REMOVAL PROCEDURE




1. Remove the left windshield garnish molding.
2. Remove the left center pillar assist handle.
3. Remove the left center pillar garnish molding.
4. Remove the left sunshade.
5. Remove the retaining screws from the headliner.
6. Gently pull down the headliner.
7. Remove the [1][2]inside air temperature sensor from the headliner.
8. Disconnect the electrical connector from the [1][2]inside air temperature sensor.




9. Remove the [1][2]inside air temperature sensor from the headliner.

INSTALLATION PROCEDURE




1. Install the [1][2]inside air temperature sensor to the headliner.




2. Connect the electrical connector to the [1][2]inside air temperature sensor.
3. Install the screws to the headliner.
4. Install the left sunshade.
5. Install the left center pillar garnish molding.
6. Install the left center assist handle.
7. Install the left windshield garnish molding.