Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

ZF S6-650 - Manual Transmission

Vehicle Speed Sensor (VSS)
Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Disconnect the electrical connector from the speed sensor.
3. Remove the vehicle speed sensor bolt.
Remove the speed sensor from the transmission.

Installation Procedure





1. Lightly lubricate the new O-ring with transmission fluid.
2. Install the speed sensor to the transmission.
3. Install the speed sensor bolt.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the VSS bolt.
^ Tighten the VSS Bolt to 10 Nm (88 inch lbs.).
5. Connect the electrical connector to the VSS.
6. Lower the vehicle.