Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear (Without Traction Control)

Wheel Speed Sensor Replacement-Rear (Without Traction Control)
Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
Disconnect the wheel speed sensor connector.
2. Clean all dirt and debris from the sensor housing/sensor interface area.
3. Remove the wheel speed sensor bolt (3).
4. Remove the wheel speed sensor (4).

Installation Procedure





1. Install the wheel speed sensor (4).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the wheel speed sensor mounting bolt (3).
- Tighten the bolt to 10 Nm (89 inch lbs.).
3. Connect the wheel speed sensor connector.
4. Lower vehicle.