Fog Lamp Replacement - Front

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




1. Partially remove the front edge of the front fender liner in order to gain access to the fog lamps.




2. Remove the bulb/socket from the fog lamp.
3. Remove the bulb from the socket, if required.
4. Remove the bolts (3) from the fog lamp.
5. Remove the fog lamp (2) front bumper lamp impact bar (1).

INSTALLATION PROCEDURE




1. Install the fog lamp (2) front bumper impact bar (1).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the bolts to the fog lamp (3).

Tighten
Tighten the fog lamp bolts to 6 N.m (53 lb in).

3. Install the bulb to the socket, if required.
4. Install the bulb/socket to the fog lamp.




5. Install the front fender liner.