Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2001 >> Cavalier L4-2.2L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Testing and Inspection >> Scan Tool Testing and Procedures >> 4T40-E/4T45-E Automatic Transaxle >> Scan Tool Data Definitions
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Scan Tool Data Definitions

Scan Tool Data Definitions

Body Control Module (BCM)

Battery Voltage: Display indicates battery voltage. Measured in volts.

Brake to Shift Relay: Displays indicates ON when the body control module a ground to the automatic transmission shift lock control solenoid A/T shift lock control circuit.

BTSI Output: Display indicates ON when the Brake to Shift Relay is ON.

Ignition 1: Display indicates ON when the ignition 1 input circuit of the module receives a battery signal from the ignition switch.

Park (BTSI) Output Feed: Display indicates ON when the Brake to Shift Relay is ON.

Powertrain Control Module (PCM)

Current Gear: Displays current gear position of the transmission

TCC Brake Switch: Displays ON or OFF status of the TCC Brake switch.

TR Sw. A/B/C/P: Displays LOW or HI for the state of each of the four inputs from the IMS. LOW displayed indicates a low voltage signal (0 volts) being monitored at the PCM. Hi displayed indicates a high voltage signal (B+) being monitored at the PCM.

pro multis · About Operation CHARM