Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Standard Column

Removal Procedure
1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement-On Vehicle.
2. Remove the multifunction switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement-On Vehicle.





3. Remove the 2 retaining head screws from the windshield wiper switch (2).
4. Remove the windshield wiper switch (2) from the column (6).
5. Disconnect the electrical connector from the windshield wiper switch.

Installation Procedure





1. Connect the electrical connector to the windshield wiper switch (2).
2. Install the windshield wiper switch (2) to the column (6).

Notice Refer to Fastener Notice in Service Precautions.

3. Install the 2 retaining screws to the windshield wiper switch (2).
- Tighten the screw to 4 Nm (36 inch lbs.).
4. Install the multifunction switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement-On Vehicle.
5. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement-On Vehicle.
6. Ensure that the windshield wiper switch (2) functions properly.