Standard Models (Non-Alternative Fuels)

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure.
3. Raise the vehicle.
4. Remove the fuel tank.
5. Remove the fuel tank vapor pressure sensor electrical connector.




6. Remove the fuel tank pressure sensor (1) from the fuel modular sender (2).

INSTALLATION PROCEDURE




1. Install the fuel tank vapor pressure sensor (1) to the fuel modular sender (2).




2. Install the electrical connector to the fuel tank vapor pressure sensor.
3. Install the fuel tank.
4. Lower the vehicle.
5. Connect the negative battery cable.