Window Handle: Service and Repair

Door Window Regulator Handle Replacement

Tools Required

J 9886-01 Door Handle Clip Remover

Removal Procedure




1. Remove the spring clip by inserting the J 9886-01 between the window regulator handle and the door window regulator handle bearing plate.




2. Pull the door window regulator handle (2) outward in order to remove the handle.
3. Remove the door window regulator handle bearing plate (1).

Installation Procedure

1. Raise the window to the full up position.




2. Install the clip to the door window regulator handle (2).




3. Install the door window regulator handle bearing plate (1).
4. Position the door window regulator handle.
5. Push the door window regulator handle inward in order to secure the handle.