Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the instrument panel compartment. Refer to Compartment Replacement - IP in Instrument Panel, Gauges and Warning Indicators.
2. Disconnect the cruise control module electrical connector.
3. Remove the following components from the vehicle:
^ The cruise control module mounting bolt
^ The cruise control module (2)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the cruise control module (2) to the IP. Secure the module with the mounting bolt.
Tighten
Tighten the cruise control module mounting bolt to 10 N.m (89 lb in).
2. Connect the cruise control module electrical connector.
3. Install the instrument panel compartment. Refer to Compartment Replacement - IP in Instrument Panel, Gauges and Warning Indicators.