Wheel Alignment Specifications
| Front | Caster (Non-Adjustable, for Reference Only) | Service Allowed | +1.67 to +3.67 Degrees (deg) |
| Service Preferred | +2.67 Degrees (deg) | ||
| Cross Caster (Non-Adjustable, for Reference Only) | Service Allowed | 0.0 to +0.75 Degrees (deg) | |
| Service Preferred | 0.0 Degrees (deg) | ||
| Camber (non-Adjustable, for Reference Only) | Service Allowed | -1.00 to + 1.00 Degrees (deg) | |
| Service Preferred | 0.0 Degrees (deg) | ||
| Cross Camber (Non-Adjustable, for Reference Only) | Service Allowed | 0.0 to +0.75 Degrees (deg) | |
| Service Preferred | 0.0 Degrees (deg) | ||
| Toe | Service Allowed | + 0.08 to -0.08 Degrees (deg) | |
| Service Preferred | 0.0 Degrees (deg) | ||
| Total Toe | Service Allowed | +0.16 to -0.16 Degrees (deg) | |
| Service Preferred | 0.0 Degrees (deg) | ||
| Inside Turning Angle | Service Allowed | 32.5 to37.5 Degrees (deg) | |
| Service Preferred | 34.5 Degrees (deg) | ||
| Outside Turning Angle | Service Allowed | 29.5 to 35.5 Degrees (deg) | |
| Service Preferred | 32.5 Degrees (deg) | ||
| 2WD Two Door Base Model | J Dimension | 8.31 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | |
| K Demension | 8.90 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | ||
| Z Demension | 4.02 Inch (in) | ||
| D Demension | 7.28 Inch (in) | ||
| 4 WD Two Door Base Model | J Dimension | 8.58 Inch (in) The J Measurement is taken 700 mm (27.56) in from the Front wheel centerline. | |
| K Demension | 9.17 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | ||
| Z Demension | 4.02 Inch (in) | ||
| D Demension | 7.28 Inch (in) | ||
| 4WD Two Door ZR2 | J Dimension | 9.13 Inch (in) The J Measurement is taken 700 mm (27.56) in from the Front wheel centerline. | |
| K Demension | 9.65 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | ||
| Z Demension | 4.02 Inch (in) | ||
| D Demension | 7.28 Inch (in) | ||
| 2WD Four Door Base Model | J Dimension | 8.27 Inch (in) The J Measurement is taken 700 mm (27.56) in from the Front wheel centerline. | |
| K Demension | 8.90 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | ||
| Z Demension | 4.02 Inch (in) | ||
| D Demension | 7.28 Inch (in) | ||
| 4WD Four Door Base Model | J Dimension | 8.54 Inch (in) The J Measurement is taken 700 mm (27.56) in from the Front wheel centerline. | |
| K Demension | 9.17 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | ||
| Z Demension | 4.02 Inch (in) | ||
| D Demension | 7.28 Inch (in) | ||
| 4WD Four Door ZR2 | J Dimension | 9.06 Inch (in) The J Measurement is taken 700 mm (27.56) in from the Front wheel centerline. | |
| K Demension | 9.72 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | ||
| Z Demension | 4.02 Inch (in) | ||
| D Demension | 7.28 Inch (in) | ||
| 4WD Four Door LT | J Dimension | 8.78 Inch (in) The J Measurement is taken 700 mm (27.56) in from the Front wheel centerline. | |
| K Demension | 9.41 Inch (in) The K Measurement is taken 700 mm (27.56) in from the Rear wheel centerline. | ||
| Z Demension | 4.02 Inch (in) | ||
| D Demension | 7.28 Inch (in) |