Cylinder Head Specifications

Apply clean engine oil to the bolt threads and install the cylinder head bolts.

Notice: In order to prevent warpage of the cylinder head, follow the sequence shown whenever removing or installing the head.

Tighten the cylinder head bolts (1-8) in the sequence shown to 53 Nm (38.5 ft. lbs.).

Tighten the cylinder head bolts (1-8) in the sequence shown to 84 Nm (61 ft. lbs.).

Loosen the cylinder head bolts in the reverse order to 0 torque.

Tighten the cylinder head bolts (1-8) in the sequence shown to 53 Nm (38.5 ft. lbs.).

Tighten the cylinder head bolts (1-8) in the sequence shown to 84 Nm (61 ft. lbs.).

Tighten the cylinder head bolts (1-8) in the sequence shown to 105 Nm (76 ft. lbs.).

Install the hex bolt (1).
Tighten the bolt to 11 Nm (7.5 ft. lbs.).