Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crash Control Module: Service and Repair

REAR OBJECT ALARM DETECTION MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the right rear compartment side trim. Refer to Trim Panel Replacement - Rear Quarter Lower in Interior Trim.
2. Disconnect the electrical connector from the rear object detection module.
3. Remove the mounting bolts from the rear object detection module.
4. Remove the rear object detection module from the vehicle.

INSTALLATION PROCEDURE




1. Align the rear object detection module to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the rear object detection module mounting bolts.

Tighten
Tighten the rear object detection module mounting bolts to 10 N.m (89 lb in).

3. Install the electrical connector to the rear object detection module and press in locking tab.
4. Install the rear compartment side trim. Refer to Trim Panel Replacement - Rear Quarter Lower in Interior Trim.