Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

LH

REMOVAL PROCEDURE




1. Disable the SIR system.
2. Remove the driver seat.
3. Unclip the J-clips on the back of driver's seat.
4. Using a flat head screwdriver, remove the plastic molding (2) that holds the driver side air bag inflator module (1) to the driver seat back frame.




5. Note the routing of the driver side air bag inflator module wiring harness (3) and retaining clip attachments within the driver seat.
6. Remove the driver side air bag inflator module wiring harness retaining clips from the driver seat frame.
7. Remove the driver side air bag inflator module wiring harness (3) from the driver seat frame.
8. Remove the driver side air bag inflator module (1) from the driver seat back frame.

INSTALLATION PROCEDURE




1. Install the driver side air bag inflator module wiring harness (3) to the driver seat frame, while guiding the wiring harness through the appropriate spots on the driver seat frame.
2. Install the driver side air bag inflator module wiring harness retaining clips to the driver seat frame.




3. Install the plastic molding (2) that holds the driver side air bag inflator module to the driver seat back frame.
4. Install the driver side air bag inflator module (1) to the driver seat back frame.
5. Connect the J-clips on the back of driver's seat.
6. Install the driver seat.
7. Enable the SIR system.