Trunk / Liftgate Weatherstrip: Service and Repair

Weatherstrip Replacement - Lift Gate

Removal Procedure





1. Remove all of the interior trim in order to access the weatherstrip.
2. Pull the weatherstrip from the pinch-weld flange. Start at the upper right corner.



Installation Procedure






Important: The weatherstrip attaches to the pinch-weld flange in 6 areas. The weatherstrip length distributes equally around the door opening.


1. Install the weatherstrip at the top right corner. Seat the weatherstrip onto the pinch-weld flange.
2. Position and install the weatherstrip by hand.
3. Using a rubber mallet during the final installation may be required in the thick flange areas and in each corner.