Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2002 >> C 7500 Kodiak V8-8.1L VIN E >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair




Powertrain Control Module (PCM) Replacement

Removal Procedure

Notice: Refer to PCM and ESD Notice in Cautions and Notices.

Important: Do not substitute a powertrain control module (PCM) from another vehicle for diagnosis.


Important: The ignition should always be OFF when installing or removing the PCM connectors.


1. Open the hood.




2. Remove the PCM housing cover (5).
3. Remove the PCM harness connectors (4).
4. Remove the PCM bracket retaining bolt.
5. Remove the PCM (3) from the bracket (2).

Installation Procedure




1. Install the PCM (3) to the bracket (2).
2. Install the PCM bracket retaining bolt.
3. Install the PCM harness connectors (4).
4. Install the PCM housing cover (5).
5. Program the electrically erasable programmable read only memory (EEPROM) if a new PCM is being installed. Refer to Powertrain Control Module (PCM) Programming (On-Board) Powertrain Control Module (PCM) Programming (On-Board)Powertrain Control Module (PCM) Programming (Off-Board) Powertrain Control Module (PCM) Programming (Off-Board).

pro multis · About Operation CHARM