Tailgate Latch: Service and Repair

Latch Replacement - End Gate (Coupe)

Removal Procedure

1. Open the window panel.
2. Remove the rear compartment trim as needed.
3. Disconnect the rear compartment lid release switch electrical connector.
4. Disconnect the rear compartment lid lock release actuator secondary lock retainer and electrical connector.




5. Remove the endgate latch bolts (1).
6. Remove the latch (2).

Installation Procedure




1. Install the latch (2).
Align the holes in the latch with the holes in support.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the endgate latch bolts (1).

Tighten the bolt to 10 N.m (89 lb in).

3. Connect the rear compartment lid lock release actuator electrical connector and secondary lock retainer.
4. Install the rear compartment trim.