Trunk / Liftgate Lock Cylinder: Service and Repair

Lock Cylinder Replacement - Lift Gate

Removal Procedure

1. Open the window panel.
2. Remove the rear end finish panel.




3. Remove the rivets (4).
4. Remove the lock cylinder (3).

Installation Procedure






Important: Position the tan dot on the lock cylinder upward when installing the lock cylinder.

1. Install the lock cylinder (3).
Guide the lock cylinder shaft through the hole in the rear end panel into the hole in the lock support.
2. Align the lock cylinder.
3. Install the right rivet (4).
4. Install the left rivet (4).
5. Install the rear end finish panel.