Manifold Pressure/Vacuum Sensor: Service and Repair

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the air cleaner outlet resonator.
2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
3. Remove the MAP sensor attaching screw (1).
4. Remove the MAP sensor vacuum hose (2).

INSTALLATION PROCEDURE




1. Connect the vacuum hose (2).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the MAP sensor attaching screw (1).

Tighten
Tighten the attaching screw to 6.5 N.m (5.7 lb in).

3. Connect the MAP sensor electrical connector.
4. Install the air cleaner outlet resonator.