Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2002 >> Corvette V8-5.7L VIN G >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the intake manifold.
3. Remove the camshaft position (CMP) sensor electrical connector.

IMPORTANT: Clean the area around the CMP before removal in order to avoid debris from entering the engine.

4. Remove the CMP sensor retaining bolt.
5. Remove the CMP sensor.

INSTALLATION PROCEDURE




1. Install the CMP sensor.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the CMP sensor retaining bolt.

Tighten
Tighten the CMP to 25 N.m (18 lb ft).

3. Connect the CMP sensor electrical connector.
4. Install the intake manifold.
5. Connect the negative battery cable
6. Program the transmitters. Programming and Relearning
pro multis · About Operation CHARM